A simple synthesis of natural spinazarins and their analogues

A short simple synthesis of spinazarins (2,3-dihydroxy-naphthazarins or 2,3,5,8-tetrahydroxy-1,4-naphtho-quinones) from available 2,3-dichloronaphthazarin derivatives involves replacement of chlorine atoms with azido groups followed by their acidic hydrolysis. The procedure can be used for the preparative synthesis of natural biologically active spinazarins and their analogues.     

Construction and application of carbon nanotube/polypyrrole-based bacterial surface imprinted sensorEI北大核心CSCD

A simple and fast "non-hole" bacteria surface imprinted (SPBIP) impedance sensor was constructed for ultrasensitive detection of Salmonella. The SPBIP sensor was prepared by one step electropolymerization of pyrrole (functional monomer), single-walled carbon nanotube (SWNT, nano-modulator), and Salmonella(template) onto a glassy carbon electrode. After removing the bacterial template, "non-hole" imprinted sites were formed on the surface of the polymer matrix, allowing the target bacteria to be specifically recognized. The resulting changes in the electrode surface impedance could be used to detect the target bacteria. The effects of the amount of SWNT, polymerization cycles, eluents, elution time and recognition time on the recognition ability of the sensor were investigated. Under the optimal conditions, the sensor could be used to detect 10~1×107 CFU/mLSalmonella with the limit of detection of 3.5 CFU/mL. The sensor could be used for the detection of salmonella in drinking water and orange juice samples with the recoveries ranging from 95.4% to 109.5%. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Z型CdIn2S4/ZnSnO3异质结的构筑及其光催化产氢性能

通过高温煅烧ZnSn(OH)₆前驱体制备了双壳中空立方体结构的ZnSnO₃(ZSO),进而采用水热法将CdIn₂S₄(CIS)纳米晶包裹在ZSO表面,成功制备了CdIn₂S₄/ZnSnO₃(CIS/ZSO)异质催化剂。活性产氢实验结果表明,CIS、ZSO物质的量之比为12%时制备的12% CIS/ZSO具有优异的光催化产氢性能,在3 h内产氢量为1 676.48 μmol·g^-1,分别是ZSO和CIS的12倍和8倍。ZSO光催化析氢反应活性的增强归因于CIS/ZSO异质结构的成功构建,异质界面的形成显著提高了光生电子/空穴对的分离效率,降低了其复合率。通过对电荷转移路径的分析,提出了可能的反应机理。     

Combinatorial Screening of Water/Proton Permeation of Self-Assembled Pillar[5]arene Artificial Water Channel Libraries

Artificial water channels (AWCs) that selectively transport water and reject ions through bilayer membranes have potential to act as synthetic Aquaporins (AQPs). AWCs can have a similar osmotic permeability, better stability, with simpler manufacture on a larger-scale and have higher functional density and surface permeability when inserted into the membrane. Here, we report the screening of combinatorial libraries of symmetrical and unsymmetrical rim-functionalized PAs A – D that are able to transport ca. 10⁷–10⁸ water molecules/s/channel, which is within 1 order of magnitude of AQPs’ and show total ion and proton rejection. Among the four channels, C and D are 3–4 times more water permeable than A and B when inserted in bilayer membranes. The binary combinations of A – D with different molar ratios could be expressed as an independent (linear ABA ), a recessive (inhibition AB , AC , DB , ACA ), or a dominant (amplification, DBD ) behavior of the water net permeation events.     

Hydrogen Peroxide Production of Individual Nanosecond Pulsed Discharges Submerged in Water of Elevated Conductivity

The production of hydrogen peroxide (H₂O₂) is a key parameter for the performance of pulsed discharges submerged in water utilized as advanced oxidation process. So far, any related assessment of the underlying mechanism was conducted for the application of several hundred discharges, which did not allow for a correlation with physical processes. Moreover, the production was rarely investigated depending on water conductivity as one of the most important parameters for the development of submerged discharges. Accordingly, hydrogen peroxide generation was investigated here for individual single discharge events instigated with 100 ns high-voltage pulses in water with three different conductivities and was associated with the discharge development, i. e. spatial expansion and dissipated electrical energy. The approach necessitated the improvement of an electrochemical flow injection analysis based on the reaction of Prussian blue with H₂O₂. Hydrogen peroxide concentrations were quadratically increasing with propagation time and stable for different water conductivities. H₂O₂ production per unit volume of a discharge was constant over time with an estimated rate constant of 3.2 mol ⋅ m⁻¹ s⁻¹, averaged over the crosssectional area of all discharge filaments. However, the individually dissipated energy increased with conductivity, hence, the production efficiency decreased from 6.1 g ⋅ kWh⁻¹ to 1.4 g ⋅ kWh⁻¹, which was explained by increased resistive losses within the bulk liquid.     

Tuning the Composition and Structure of Ni@MoC Nanosheets for Highly Active and Stable Electrocatalysis in Water Splitting

The conventional electrolytic water-splitting process for hydrogen production is plagued by high energy consumption, low efficiency, and the requirement of expensive catalysts. Therefore, finding effective, affordable, and stable catalysts to drive this reaction is urgently needed. We report a nanosheet catalyst composed of carbon nanotubes encapsulated with MoC/Mo₂C, the Ni@MoC-700 nanosheet showcases low overpotentials of 275 mV for the oxygen evolution reaction and 173 mV for the hydrogen evolution reaction at a current density of 10 mA ⋅ cm⁻². Particularly noteworthy is its outstanding performance in a two-electrode system, where a cell potential of merely 1.64 V is sufficient to achieve the desired current density of 10 mA ⋅ cm⁻². Furthermore, the catalyst demonstrates exceptional durability, maintaining its activity over a continuous operation of 40 hours with only minimal attenuation in overpotential. These outstanding activity levels and long-term stability unequivocally highlight the promising potential of the Ni@MoC-700 catalyst for large-scale water-splitting applications.     

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br⁻ counterions compared to smaller Na⁺ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H⁺ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H⁺ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.     

固相膜萃取-气相色谱法测定养殖用水中痕量有机磷农药

采用固相膜萃取-气相色谱法测定养殖用水中乐果、甲基对硫磷和马拉硫磷等3种有机磷农药的含量。水样经C18固相萃取膜萃取后,用丙酮和二氯甲烷洗脱。用SPB-608毛细管色谱柱分离,氮磷检测器检测。3种有机磷农药的质量浓度均在0.02~1.0μg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.0025~0.004μg·L-1之间。以空白样品为基体进行加标回收试验,回收率在93.0%~111%之间,测定值的相对标准偏差(n=5)在0.13%~5.2%之间。     

气相色谱-质谱法测定环境水体中24种半挥发性有机物

采用液液萃取-气相色谱-质谱法同时测定环境水体中的24种半挥发性有机物。水样经二氯甲烷萃取,萃取液经浓缩定容后在DB-5MS毛细管色谱柱上分离,质谱中选择电子轰击离子源-选择离子监测模式,以菲-D10为内标物进行定量。24种化合物的质量浓度在一定范围内与其峰面积呈线性关系,检出限为0.03~0.28μg·L-1。加标回收率在70.1%~128%之间,测定值的相对标准偏差(n=6)小于6%。实际样品分析结果表明,某地地表水和化工区水样中均检出硝基苯类、氯代苯酚类、酞酸酯类等化合物。     

流动注射-分光光度法测定河口水中氨氮的盐效应及校正

建立了流动注射-分光光度法测定河口水中氨氮的盐效应的校正办法。样品溶液中的钙离子、镁离子是造成盐效应的主要因素。低盐区域(盐度0~10)随盐度增加,校正系数迅速降低;高盐区域(盐度10~30)随盐度增加,校正系数缓慢增加。氨氮的线性范围为3.00~300μg·L-1,方法的检出限(3S/N)为1.97μg·L-1。对20.0μg·L-1氨氮标准溶液连续测定7次,测定值的相对标准偏差为4.5%。用标准加入法做方法的回收试验,测得回收率在80.7%~108%之间。